Pro-Ject VC-S3
Controls, features and connections
1 Vacuum arm* (adhesive velvet strips attached)
2 Motor shaft
3 Hexagon screw for fastening the platter
4 Ventilation outlet grille and drain hole
5 Main switch with mains power cord socket
6 Vacuum on/off switch
7 Motor on/off direction switch
8 Motor shaft bushing
9 Magnetic clamp* with self-adhesive record label seal
10 Vacuum arm flange
11 Water level gauge
12 Record platter (bottom part of the clamp)
Accessories (included, but not shown above)
- Wash it 2 vinyl cleaning fluid, 100ml bottle**
- Goat hair brush*
- Replacement adhesive strips for vacuum arm*
- AC power cord*
- Drain insert (spout)*
- 2.5mm hexagon key*
Optional accessories (available on request)
➢ Wash it 2 cleaning fluid, bottle sizes: 250ml/500ml/1l (1l ≙ 166 records / both sides)
➢ Goat hair brush
➢ Adhesive strips for vacuum arm
To Next Page
Loading...