SPECIFICATIONS
Air Inlet 1/4 in.
Drive Size 1/2 in.
Max. Pressure Rating 90 PSI
Average CFM @ 15 Second Run Time 6.5 CFM
CFM @ Full Load 21.2 CFM
Hammer Mechanism Twin
Max. Bolt Capacity 5/8 in.
Torque Range 200 to 1,150 ft-lb
Max. Torque 1,150 ft-lb
Speed Rating 8,000 RPM
Min. Hose Size 3/8 in.
Air Exhaust Handle
Overall Length 7 in.
Weight 4,6 lb
Material Composite
INTRODUCTION
The impact wrench is ideal for tightening or loosening heavy duty nuts
and bolts.
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to the
equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
V1.0 COMPOSITE AIR IMPACT WRENCH 9058421
Page 3 Assistance available at www.princessauto.com or 1-800-665-8685
To Next Page
Loading...