1
Description
SS-331 designed for lead free desoldering especially. The quick heating and strong
power are for convenient and clear soldering / desoldering all types of DIP
components.
Reasonable structure, single hand operation and strong absorbing power can be
easy removal of the residual solder from the one-sided or two sided of the PCB.
This tool is used in the fields of electronic research, teaching and production,
especially in the repairing and desoldering on the electronic appliances and
communication equipments.
1. Control Unit
The desoldering iron gun is controlled automatically by the micro-processor. The
digital control electronics and high-quality sensor and heat exchange system
guarantee precise temperature control at the soldering tip. The highest degree of
temperature precision and optimal dynamic thermal behavior under load conditions
is obtained by the quick and accurate recording of the measured values in a closed
control circuit, and this design is especially for the lead-free production techniques.
2. Desoldering Iron gun (5SS-331N-DG)
Desoldering iron gun with a power of 90W and a wide spectrum of soldering tips can
be used anywhere in the electronics field.
The high power and gun type design make this iron gun suitable for fine desoldering
work. The heating element is made of ceramic and the sensor on the desoldering tip
can control the desoldering temperature quickly and accurately.
Technical Specification
Approximately 10 minutes if not use
Spare tip x 3 ( 1.2(on the gun)1.0/ 1.5mm)
Cleaning tool x 3 (0.7/0.9/ 1.2mm)
Filter sponge x 4 (φ20.8x1 +φ16.8x3)
To Next Page
Loading...