4
5. Keep children at a distance
Warning: this appliance is not intended for use by young children and
infirm persons unless they have been adequately supervised by a
responsible person to ensure that they can use the appliance safely.
Warning: Young children should be supervised to ensure that they do not play
with the appliance.
Unused desoldering station should be stored in a dry location which is out of the
reach of children. Switch off all unused desoldering station.
6. Protect yourself against electrical shocks
Avoid touching grounded parts with your body, e.g. pipes, heating radiators and
so on. The grip of antistatic designed desoldering tool is conductive.
7. Work environment
Do not use the desoldering station in a moist or wet environment. The
desoldering iron gun should be placed on the holder after finished using.
8. Observe the valid safety regulations at your work place.
Desoldering Gun Maintenance
WARNINGS:
1. To avoid injury or damage the items, do not touch the metallic parts near the
nozzle, and do not use this system near the flammable items.
2. Remove the power plug before performing maintenance procedure, except
doing the nozzle and heating element clean process.
3. If the pump does not operate, immediately clean the nozzle & heating element,
and replace the filter
Push the knob up, and then pull the
back holder.
To Next Page
Loading...