Probuilder 61388 - Assembly Steps; Step 1: Attach Feet; Step 2: Wall Mounting; Step 3: Install Benchtop

49 pages

To Next Page

To Previous Page



1. Screw the feet to the tall cabinet (1), drawer module (5) and cabinet (6).

2. Place the tall cabinet against the wall and secure with suitable screws and rawlplugs in the

holes at the top inside the tall cabinet. Place the drawer module and cabinet next to the tall

cabinet. If necessary, adjust the feet so the cabinets stand level and do not tilt.

3. Place the benchtop (4) above the drawer module and cabinet.