Proceq Pundit Lab - Page 9

© 2013 by Proceq SA
8
4. Viewing the Waveform
While carrying out the measurements described in the following chapter it is possible to view
the received waveform. Pundit Lab offers three possibilities to look at the waveform.
Oscilloscope
Connect an oscilloscope to the connector on the rear panel. A typical waveform will look like
this:
Both the trigger pulse and the
received waveform are displayed.
Pundit Link - PC
The waveform may also be
viewed on a PC or Laptop co
nnected via the USB port. Please refer
to the Pundit Link operating instructions for details (chapter 9).
On the instrument
The waveform may be directly viewed on the instrument. See next chapter for operating de-
tails.
Rx Waveform
Trigger pulse