Proctor-Silex 49961 - How to Brew Ground Coffee

7
How to Brew Ground Coffee
NOTE:
• It can take up to 2 minutes before brewed coffee starts
dispensing into your cup. Total brew time average is 4
minutes. For best results, allow the coffee maker to cool for
at least 2 minutes between brewing cycles.
w WARNING
Burn Hazard.
To avoid contact with hot coffee or water:
• Do not fill water above MAX fill line (10 ounces [296 ml]).
• Fill reservoir with the cup of water into which the coffee will
be brewed.
• Fully insert cup under brew basket.
• Remove single-serve pack holder before adding coffee
grounds to brew basket.
1. Plug in unit and slide out the brew basket.
2. To remove single-serve pack holder, press
down on the single-serve pack holder tab;
then lift out.
w CAUTION
Cut Hazard.
Removable single-serve pack holder has a
sharp blade. Use caution when handling.
3. Place removable holder in brew basket and
add ground coffee. (3 tablespoons [44 ml]
is the MAX amount of any type of grounds.)
w WARNING
Burn Hazard.
To avoid overflow, keep ground coffee below MAX fill line.