3
14 The appliance must be cooled down com-
pletely before storing.
15 If the cord is damaged and needs replace-
ment, it must be replaced by the manu-
facturer’s service agent or similarly quali-
ed technician in order to avoid hazard.
16 The appliances are not intended to be ope-
rated by means of an external timer or se-
pa rate remote-control system.
FOR HOUSEHOLD USE ONLY
BEFORE FIRST USE
WARNING! PLEASE ENSURE THAT
THE APPLIANCE IS IN SAFE AND SECURE
POSITION BEFORE USING.
POSITIONING
1 Put the appliance on a stable, level surface.
2 Route the cable so it does not overhang,
and cannot be tripped over or caught.
USING THE HOT PLATE
1 Before using your hot plate
for the rst
time, turn the heat controller
to the
highest setting (position 5) for 3 to 5 min-
utes to protect the coating. This should be
done when there is no cookware on the
hot plate.
2 Switch the appliance on by turning the
heat controller
. When the indicator
light
turns on, the appliance is in use.
3 Turn the heat controller
to the required
position (1-lowest temperature, 5-max. tem-
perature, OFF-switched o), to achieve the
desired temperature. The indicatior light
will turn o when the hot plate reaches
the selected temperature which will be
maintained.
4 When not in use, ensure that the heat
controller is in the OFF position and dis-
connected from the power outlet.
5 Some requirements of the cooking utensils:
a) For the most ecient use, the cooking
utensil should have a solid base that
are as even as possible.
b) The cookware base diameter should
be smaller than the diameter of the hot
plate.
c) Do not use cookware with convex, con-
cave or an uneven bottom.
CARE & MAINTENANCE
1 Disconnect the plug from the socket.
2 Clean the appliance with a soft cloth.
Avoid using abrasive cleaners.
WIRING INSTRUCTIONS - UK PLUGS ONLY
The product must be earthed.
It has a 13A BS1362 fuse in a
13A BS 1363 plug. To replace
the plug, t the green-yellow
wire to
or E, blue wire to
N and the brown wire to L. Fit
the cord grip. If in doubt, call
an electrician. Do not use a non-wireable plug
unless the fuse cover is in place. If you re-
move the plug, dispose of it.
ENVIRONMENTAL PROTECTION
To avoid environmental and health
prob lems due to ha zar dous substan-
ces in electrical and electro nic goods,
ap plian ces marked with this symbol must not
be disposed of with unsorted municipal waste,
but re co ve red, reused or recycled.
SERVICE
If you ring Customer Service, please have the
Model No. to hand, as we won’t be able to
help you without it. The product is not us-
er-serviceable. If it is not working, read the
instructions, check the plug fuse and main
fuse/circuit breaker. If it is still not working,
consult your retailer.
If that does not solve the problem – ring Cus-
tomer Service – they may be able to oer
technical advice. If they advise you to return
the product to us, pack it carefully, include
a note with your name, address, day phone
number, and description of the problem.
If under a warranty, say where and when it
was purchased and include proof of pur-
chase. Send it to SQ Professional Ltd.
To Next Page
Loading...