To Next PageTo Next Page
Need help?Do you have a question about the Profi-pumpe 400-10 and is the answer not in the manual?
General| Type | Submersible Pump |
|---|---|
| Power consumption | 400 W |
| Max Head | 10 m |
| Max. immersion depth | 7 m |
| Cable length | 10 m |
| Protection class | IPX8 |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max. flow rate | 10000 l/h |
Ensures professional installation, electrical checks, RCD breaker, and proper wiring for safe operation.
Details on suction line diameter, rising installation, mechanical load isolation, and check valves.
Procedure for filling the pump and suction line with water, and protection from external elements.
Visual guides for rainwater harvesting, system pressure increase, and tank operation modes.
Explains automatic mode, indicators, tap operation, and dry-running protection.
Details on using the pump for filling water tanks with timed cycles and float valve integration.
Overview of the pump's display panel and its indicators for various operating modes.
Guide to setting the pump's automatic start and stop pressure points for desired performance.
Steps to resolve pump cycling or stopping issues by checking lines and regulator settings.
Essential safety rules covering electrical, operational, and environmental hazards.
Manufacturer's statement regarding responsibility for misuse or disregard of instructions.
Recommended checks for mechanical components, seals, and cleaning after specific operating hours.
Instructions for emptying and storing the pump to prevent frost damage.
Details on warranty coverage for defects and common exclusions like wear and dry running.
A comprehensive table listing common pump problems, their causes, and solutions.
Manufacturer's statement limiting liability for damages caused by unauthorized modifications.
Guidance on disposing of the product according to WEEE regulations for environmental protection.
Information regarding compliance with EU directives and harmonized safety standards.
Detailed performance metrics including power, current, capacity, pressure, and dimensions.
Visual representations of pump dimensions and connection points for installation planning.
Highlights advantages like energy saving, constant pressure, noise reduction, and extended pump life.
