EasyManua.ls Logo

Profile 545144210 - Compressor Protection

Profile 545144210
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
545144210 MONOBLOCK AIR CONDITIONER NL
15
HEATING
The 'heating' mode defaults to 24°C and heats the air inside
while sending cool air outside. The desired temperature can
be set with the UP/DOWN buttons between 16°C and 30°C.
The fan speed can be adjusted using the speed knob.
SILENT
Silent/sleep mode can be activated from the app or the
remote control. It will only operate in the cooling or heating
mode. The fan speed will change to low and the device will be
quieter.
FAN SPEED
Press the FAN SPEED button to change the fan speed between
Low, Medium and High. The fan speed cannot be adjusted in
"dehumidifying" or sleep mode.
TIMER
period. The timers cannot be combined. However, different operating
display shows "0" 5 times. After the 5th flashes; use the UP/DOWN
buttons to set the time period in 1-hour intervals (min. 1, max. 24 hours).
display shows "0" 5 times. After the 5th flashes; use the UP/DOWN
buttons to set the time duration in 1-hour intervals (min. 1, max. 24
hours). After this interval has elapsed, the unit will automatically turn on in
UP/DOWN
Also used when setting the timer to adjust the duration.
SING MODE
and down automatically. Press the SING button again and the blind will
remain in its current position. The swing mode can only be set with the
COMPRESSOR
PROTECTION
compressor and electronic components, wait at least 5 minutes to turn the