EasyManua.ls Logo

ProFlo PF92250 - Safety Warnings and Precautions; DANGER: Water and Electricity Hazards; WARNING: Electrical Shock Risk; NOTICE: Ground Fault Interrupt Device

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Carefully read and understand all of the Warnings and installation instructions in this
manual. Failure to follow these instructions could lead to serious bodily injury and/or
property damage. Retain these instructions for future reference.
This pump has been manufactured with your needs in mind. Properly installed in the right
application, your new PROFLO Pump will give you years of carefree performance.
DANGER Water and electricity can be dangerous if certain precautions are not adhered
to. This pump is designed to operate perfectly safe in a water environment; however,
improper use and installation can result in personal harm from electrical shock. Please pay
attention to the following warnings.
WARNING
Never touch any electrical device, including this pump, when it is touching water, in water, or
even in a moist environment. Always unplug (disconnect the electricity) when working on or
installing the unit.
WARNING
RISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and
grounding-type attachment plug. To reduce the risk of electrical shock, be certain that it is
connected only to a properly grounded, grounding-type receptacle.
WARNING Do not use the power cord or discharge hose to carry or handle the pump.
Doing so may cause damage to the power cord or discharge hose. Use the carrying handle
supplied with the pump.
WARNING Always use a grounded outlet. A three-prong mating type receptacle is
needed for safe use. This should be in accordance with the National Electric Code and any
additional codes or laws required by your local government.
NOTICE It is strongly recommended to use a ground fault interrupt device on any
electrical appliance, including this pump, when used in a wet or moist environment. This is
required by many local codes and enforcement agencies
REPLACEMENT PARTS
1
4
2
3
5
6
7
8
9
1
2
4
5
6
7
8
10
10
11
Ref
#
Description
PARTS FOR MODEL
PF92250
PF92260
PF92251
PF92330
PF9330PB
PF92342
PF92331
PF92341
PF92351
PF92501
PF92352
PF92511
1
Power Cord
PF99008
PF99008
2
Handle
PF99050
PF99051
PF99050
PF99051
PF99051
PF99051
3
Hose Coupling
PF99007
N/A
PF99007
N/A
4
Oil Fill Plug with
O-ring
PF99056
PF99056
PF99056
PF99056
PF99056
PF99056
5
Shaft Seal
PF99057
PF99057
PF99057
PF99057
PF99057
PF99057
6
Impeller
PF99060
PF99087
PF99065
PF99096
PF99070
PF99070
7
Gasket
PF99062
PF99088
PF99062
PF99088
PF99064
PF99064
8
Volute/Base
PF99067
PF99078
PF99069
PF99078
PF99071
PF99071
9
Intake Screen
PF99073
PF99076
PF99073
PF99076
PF99074
PF99074
10
Float Switch
PF92000
PF92000
PF92000
PF92000
PF92000
PF92010
PF92010
PF92010
PF92010
11
Vertical float
Switch Bracket
N/A
N/A
N/A
N/A
N/A
PF99105
PF99105
N/A
PF99105
PF99105
N/A
12
Pump Base
N/A
N/A
PF99501*
N/A
N./A
N/A
* Replacement power cords not available for cast iron pumps ** If motor fails, replace entire pump *PF92330PB
2 7
9
12

Related product manuals