Need help?Do you have a question about the ProFurl NC 42 and is the answer not in the manual?
Step-by-step guide for assembling the A1 configuration of the lower drum mechanism.
Detailed steps for the A2 assembly, including precautions for long link plates.
Instructions for fitting the drum mechanism onto a rigging screw for B, C, and D configurations.
Steps for assembling the A1 configuration specifically for C & R model series.
Guide for fitting the removable internal rigging screw cylinder for C32, R35, C42, R42 models.
Procedure for adjusting the rigging screw when using long link plates.
Steps for adjusting the rigging screw when an internal rigging screw cylinder is used.
Table and method for calculating total required extrusion length based on model.
Instructions for cutting extrusions to the final calculated length G.
Steps for drilling and fitting the wrapstop onto the stay cable.
Guidelines for adjusting the halyard swivel for optimal sail hoist and furling.
Table listing common operational problems, their causes, and recommended remedies.
General| Type | Furling System |
|---|---|
| Model | NC 42 |
| Manufacturer | ProFurl |
| System | Manual |
| Forestay Diameter | 8-10 mm |
| Application | Sailboats |
| Material | Aluminum |
To Next Page
