Progress PAI6000E User Manual

Control panel Display
Switch on
Touch
Switch off
Touch
Touch
If the power function has ended, the
cooking zones automatically switch
back to the heat setting set previously.
Power Management
The cooking zones of the cooking surface
have a maximum power available to them.
Two cooking zones make up a pair (see fig-
ure).
So that the Power function can always be
carried out, Power Management may reduce
the power of the other cooking zone in the
pair
Example: heat setting 9 is selected on a
cooking zone. The Power function is switch-
ed on for the cooking zone paired up with it.
The Power function is performed, but heat
setting 9 on one cooking zone and Power
function on the other cooking zone of a pair
exceeds the maximum output for both.
Therefore Power Management reduces the
first cooking zone that was switched on from
9 to 7, for example, and the display for this
cooking zone alternates between 9 and 7
and then remains on the current maximum of
7. (Whether the display alternates between 9
and 7 or 9 and 6 or other values, depends on
the appliance type and the size of the cook-
ing zone.)
Using the timer
All cooking zones can use each use one of
the two timer functions at the same time.
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set
acoustic signal
00
flashes Cooking
zone switches off
Countdown timer cooking zones not in use
acoustic signal
00
flashes
If a cooking zone is switched off, the tim-
er function set is also switched off.
If a heat setting is set on this cooking
zone in addition to a countdown timer,
the cooking zone is switched off after the
time set has elapsed.
Selecting a cooking zone
Ste
p
Control panel Display
1. Touch once Pilot light of the first cooking zone flashes
6 progress

Progress PAI6000E Specifications

General

Brand	Progress
Model	PAI6000E
Category	Hob
Language	English