Progressive Industries EMS-HW50C Installation & Operating Manual

Warnings:
DO NOT
exceed the rating on the EMS for any reason. Ho
wever this device is
designed to be reduced down to 120V/15A, and still maintain full
protection.
DO
NOT modify the EMS in any way. This will void the warra
nty, compromise
protection and
could result in
a
possible shock
or fire hazard.
It is important to always check the pedestal power outlet for charring; this
condition means that the source receptacl
e is providing a weak
connection. DO NO
T use it. It could result
in
possible melting of the RV
power plug.
Progressive Industries recommends that you have a certified electrician or an
author
ized dealer perform the installat
ion of the EMS and any future
repairs that may be required.
VIP Enterprises recommends that you use qualified person
ne
l.
When running extension cord
(
s
)
from the RV to a power source always use
appropriate size cable. Make sure that the cable is rated for outdoor use
to reduce the ris
k of electrical shock. The smaller the cable the higher
resistance and more v
oltage loss, plus it may result
in an electrical fire.
Whenever servicing or installing the EMS, or any other AC power device, make
sure that the power is disconnected from the
source.
RV wiring is different than the wiring found in homes. The neutral and ground
wires are isolated in an RV.
In a home
they are tied together at the
service panel. The reason
,
homes have a bonded ground system and
RVs do not.
Therefore never bon
d the neutral and ground together for
any reason. This will create a ground fault condition and may result in
electrical shock an
d/
or
fi
re hazard.
2

Progressive Industries EMS-HW50C Specifications

General

Brand	Progressive Industries
Model	EMS-HW50C
Category	Control Unit
Language	English