SSP-30X & SSP-50X Instructions
INSTALL STEPS:
STEP 1: Plug Smart Surge Protector
into AC power. DO NOT plug in
your RV at this time. Verify GREEN
surge indicator LED(s) is on.
STEP 2: Verify which LED’s come
on. The Correct Wiring condition
occurs when both the GREEN and
BLUE LED’s are on (See Diagram
). If this does not occur you may
be experiencing one of the other three
(3) Wiring Conditions as noted in the
diagrams.
Your Smart Surge Protector will
continue to work during any of the
wiring conditions; however, only
the Correct Wiring condition (both
GREEN & BLUE LED’s on)
is optimal and any other wiring
condition should be corrected by
Campground Maintenance before use.
STEP 3: Plug in your RV power
to the Smart Surge Protector.
Refer to STEP 2 above for surge
protection wiring conditions.
Rated at 120V
Joule Rating: 825J
Surge Amps: 22,500
Response Time: <1 Nano Seconds
Rated at 120/240V
Joule Rating: 1,650J
Surge Amps: 45,000
Response Time: <1 Nano Seconds
SSP-30X
SSP-50X
SPECIFICATIONS:
FEATURES INCLUDE:
3-Color LED Indicator Lights,
Weather Resistant, Dual Line
Polarity Tester (SSP-50X only),
Pull Handle on Plug, Lifetime
Warranty, it’s portable, just
plug it in and like with all our
products its made in the USA!
Reverse Polarity
Open Neutral
Open Ground
To Next Page
Loading...