Project Nursery Soothing Projector User Manual

Quick Start Guide
Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
©2022 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268
PNP80 QSG 00
Soothing Projector, top
CHANGING THE PROJECTOR IMAGES
The Project Nursery Soothing Projector offers three sets
of images: colors/shapes (for newborns), sealife, and
transportation.
To change to a different image set:
Make sure the projector is off. Gently
twist the door on the top of the
projector to unlatch it. Then lift the
door off.
On the bottom of the projector door,
there’s a white image wheel with the
three sets of images. Grab the outside
edges of the wheel and gently rotate
them to the left or right until you feel a
click. (If you can’t go in one direction,
try the other direction). Each click is a
different image set.
Hold the projector door up to a light
to see which set you’re on. When
you’ve found the one you want, place
the projector door back on top of the
projector and twist it back into place.
Image wheel
(on the underside of
the projector door)
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Soothing Projector,
front
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
USING THE LIGHT
The front of the Soothing Projector
offers soft area illumination in three
levels of brightness, to complement
the projector lighting.
To turn the light on: Make sure
the projector is on (press and
hold
if it’s not). Press the
(LIGHT) button on the front of the
projector.
To adjust or turn off the light:
Press the LIGHT button repeatedly
to cycle through the settings (high,
medium, low, and off).
USING THE TIMER
The timer shuts the projector,
light, and sound off automatically
after 1 hour.
To set the timer: Press the
(TIMER) button on the front of the
projector.
The indicator above TIMER button
shows that the timer is active.
Press
(TIMER) again to turn the
timer off.
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Soothing Projector,
front
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
USING THE PROJECTOR
To use the projector: Make sure the
projector is on (press and hold if
it’s not). Press the
(PROJECTOR)
button on the front of the projector.
To adjust brightness of the
projector (or turn it off): Press the
(PROJECTOR) button repeatedly
to cycle through the settings (low,
high, and off).
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Soothing Projector,
front
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Wireless
Soothing Projector

Project Nursery Soothing Projector Specifications

General

Type	Soothing Projector
Material	Plastic
Sound Options	Lullabies
Timer	15, 30, 45 minutes
Projection Type	Rotating
Projection Modes	Rotating
Color Options	Multiple color options
Battery Requirements	3 AA batteries (not included)
Recommended Age	0+
Power Source	Battery Operated

Summary

Getting Started

Unpack Contents

Lists the essential items included in the package for setup.

Plug In Power Options

Explains how to power the projector using the adapter or batteries.

Turn On Device

Instructions for powering on the projector and initial pairing indication.

Pair with Phone

Steps to establish a Bluetooth connection with a mobile device.

Bluetooth Connection Tips

Advice for optimal wireless connection range and troubleshooting.

Everyday Use

Using Bluetooth Audio

How to play music from a phone, control playback, and volume.

Playing Built-in Sounds

Instructions for activating and cycling through pre-loaded audio content.

Adjusting Volume

How to control the audio volume for both Bluetooth and built-in sounds.

Projector Functions

Using the Projector Display

How to turn the projector on, off, and adjust brightness settings.

Changing Projector Images

Steps to swap between different image sets via the top door mechanism.

Using the Light Feature

Instructions for turning the light on and adjusting its brightness levels.

Timer and Support

Using the Timer Function

How to activate and deactivate the automatic shut-off timer.

Customer Support Information

Contact details for questions and assistance.