7.Select anti-crease/gentle drying additional function(s) when needed.
GB
NOTE: The additional which can be selected depend
on the programme you have selected.
functions
Anti-crease:
.
This function prevents creases from forming in the clothes.
Press to select this function. The indicator light above the button
will illuminate indicating this function is activated. If a drying
programme is finished, the dryer will continue to rotate the laundry
at intervals for approximately 2 hours.
To deactivate the function, press again and its indicator light will
go out.
8.Press
.
During the drying cycle, the status indicator light will flash to
indicate current cycle status.
9.After the cycle is finished, you can hear several beeps and the display
will show ā ā. 0:00
The final part of a drying cycle occurs without heat (cool down
cycle) to ensure that the laundry remain at a temperature which
will prevent the laundry from being damaged.
.
38
The additional functions which can be selected depend on the
.
Downloaded from www.vandenborre.be
To Next Page
Loading...
