Proluxe 6000 - Maintenance and Care; Filter and Bag Maintenance

11
Replacing the Dust Bag:
*Remember: Always have a dust bag installed when operating your vacuum cleaner.
Replace with a genuine dust bag when full.
1. Push down on knob at top of dust cover to open compartment.
2. Pull cardboard bag collar off holder. Remove and discard used dust bag.
3. Slide clean replacement bag collar onto holder. The bag lever must be
positioned behind bag collar. Never pull up the lever, rather, push it down with
dust bag.
4. Close dust cover by reinserting tab on end into groove on housing and snap
shut.
Checking the Secondary Filter:
*Important: The secondary filter protects the motor from dust and dirt.
1. Check for accumulated dust and dirt when replacing dust bag. Filter may
be cleaned as needed.
2. I
f
r
e
p
l
a
c
e
m
e
n
t