19
Changing the Agitator Brushes:
Replace agitator brushes when they are worn or when the bristles do not touch a
card held across the base plate. Replace all four brushes at the same time to
maintain maximum cleaning performance.
Remove agitator, start as described on previous page, Section 1 to 4.
1. Turn on end cap and remove.
2. Remove the agitator shaft.
3. Remove and replace the brushes on the shaft.
4. Reinstall the pulley and agitator holder making sure they are inserted
completely and firmly.
5. Reinstall remaining parts.
6. Reinstall agitator assembly as described previously in Step 6-10 on previous
page.
To Next Page
Loading...