3. Instructional Usage
3.1 Charging
1. Connect the Micro-USB charging cable on the charging port.
2. Red LED lit up to shows it is charging.
3. Red will turn into blue once fully charged.
3.2 Pairing
1. Press and hold the multifunction button about 7 seconds to switch on the
mini-handset, it automatically enters the pairing mode. The red and blue indicator
lights flashes alternately.
2. Activate the Bluetooth™ feature on your phone or other Bluetooth™ devices and set it
to search for new Bluetooth™ devices.
3. Select "bluPen.2" from the list of found devices on your phone or other Bluetooth™
devices and connect. If necessary, enter passcode 0000 to pair and connect the
headset to your device. Now you can use bluPen.2 for phone calls or listening to
music.
3.3 Basic Operation
To Next Page
