Appearance & Interface Description
Operation Instructions
1. LED Charging Indicator
2. Micro-USB Charging Input
3.Mic
4. LED Indicator
5. Multi-Function Button
6. Ear Bud Charging Indicator
7. Karabiner Latch
8. Push Lock Button
1
2
3
6
7
8
4
5
1. Switching TrueBlue-2 On/Off
• To turn on TrueBlue-2, press and hold the Multi-function Button on both earpieces for about 1 second
until the Blue LED starts flashing.
• To turn off TrueBlue-2 manually, press and hold the Multi-function Button on both earpieces for about
3 seconds.
• The earpieces turn off automatically when placed in the charging box.
2. Pairing TrueBlue-2
• Before connecting TrueBlue-2 to your device, make sure that TrueBlue-2 is in pairing mode.
• To enter pairing mode, Take out either earpieces from charging case, then press and hold Multi-Function
Button for 5 seconds, until voice prompt “pairing”.
• The earpiece are in pairing mode when the red and blue LED of the left earpiece flash alternatively.
• Turn on the Bluetooth function of the device you wish to connect and search for “TrueBlue-2”. From
the list of found devices, select “TrueBlue-2”.
• TrueBlue-2 is now connected to your device, you can use it in single mode.
• If you expect to enjoy TrueBlue-2 in Couple mode, please take out the other one earpiece from Charging
case and power on it, then the earpieces will connect to each other automatically.
English
To Next Page
Loading...
