6.6.3
Menu options
At the bottom of the screen there are four menus available via the function keys.
It displays the channel/frequency where is pointing
the cursor and access the tuning menu.
It displays the selected transmission
and accesses the signal parameters.
standard menu
It displays the Tools menu.
It displays the Advanced menu.
In the Advanced menu there are some options for the merogram configuration.
►
It allows the user to select the measure to view on screen among the several
or each type of signal.
►
It allows the user to view on screen the date and time when maximum and
minimum measures were reached. To quit this view press the key
They are:
User measure:
available f
Details:
.
► Clear
It cleans the spectrogram and measures and it restarts the timer.
measures:
6.7
Datalogger
1
Description
6.7.
rements taken at different test points of the selected
installation. Measurements are made for all channels in the active channel set,
both analogue and digital.
The Datalogger function stores automatically measurements in a file set by the
user (name, channel set), and associated to a specific installation. User can store
for each datalogger measu
April 2013
6-71
To Next Page
Loading...
