PROMETHEUS Pro-1 User Guide

This is the 3 position switch of your kiln.
DISPLAY : only shows the temperature of your kiln.
HEATER : shows the temperature and HEATS the
kiln till reaches the target temperature.
OFF : turn offs the kiln.
PROGRAMMING KEYS
1) MODE
2) UP ARROW
3) DOWN ARROW
4) LEFT ARROW
For programming, take your switch to the Display
position. Press MODE key for 2 seconds , you’ll see
Su on the screen. Once you see Su, Press the “Left”
arrow button once; you will see a digit of the
Target Temperature start blinking.
1) 2) 3) 4)
Temperature inside the Firing Chamber
Target Temperature
You can leave it as it is or change it by pressing UP
and DOWN arrow keys. For changing the other digits
value, you can move the blinking digit by simply
pressing the LEFT arrow and adjust is as explained
before. When you have entered your target
temperature, just press MODE key for 2 seconds and
your adjustment is completed.
1
This is the digital controller of you kiln. It shows you
the inner temperature of your kiln and the target
temperate. When it’s supplying energy to the
heating elements, the OUT led lights.

PROMETHEUS Pro-1 Specifications

General

Brand	PROMETHEUS
Model	Pro-1
Category	Other
Language	English