The PROPR Lock Desk is a versatile and robust furniture piece designed for various office and home environments. It serves as a functional work surface, available in a range of dimensions to suit different space requirements and user needs.
Function Description
The Lock Desk provides a stable and spacious platform for work, study, or other activities requiring a flat surface. Its design incorporates a sturdy frame and a work surface, making it suitable for holding computers, documents, and other office essentials. The desk also features a cover tray and a grommet, indicating provisions for cable management, which helps maintain a tidy and organized workspace. The modular assembly allows for customization and easy setup.
Important Technical Specifications
The Lock Desk is available in multiple dimensions, offering flexibility in choosing the right size for a specific space. The available dimensions are:
- Length (L) x Width (W) x Height (H):
- L30 W18 H29
- L30 W24 H29
- L42 W24 H29
- L42 W30 H29
- L48 W24 H29
- L48 W30 H29
- L60 W24 H29
- L60 W30 H29
- L72 W24 H29
- L72 W30 H29
The components included for assembly are:
- Work Surface (#1): 1 unit
- Lateral Support (#2): 2 units
- Horizontal Support (#3): 2 units
- End Frame (#4): 2 units
- Corner Bracket (#5): 4 units
- Trim Cover (#6): 1 unit
- Leveling Glide (#7): 4 units
- M8X60mm Socket Head Bolt (#8): 4 units
- #10x1/2" Wood Screw Philips (#9): 16 or 20 units (quantity may vary based on specific model or assembly steps)
- Grommet (#10): 1 unit
- 6mm Hex Allen Wrench (#11): 1 unit (provided tool for assembly)
The desk is designed to be placed on the floor and has a weight capacity warning: "Do not place items over 300lb on furniture." This indicates a maximum load limit for the work surface to ensure safety and structural integrity.
Usage Features
The Lock Desk is designed for straightforward assembly, as detailed in the provided instructions. The assembly process involves:
- Frame Construction: Laying down lateral and horizontal supports, hooking corner brackets, and screwing down supports using the provided wood screws. This step is repeated for each corner.
- End Frame Attachment: Aligning end frames with mounting holes on the corner brackets and fully tightening them using the 6mm Hex Allen Wrench. This step is repeated for both sides of the desk.
- Cover Tray Installation: Aligning and attaching the cover tray over the appropriate mounting location. This component likely serves as a modesty panel or for cable management.
- Final Touches: Once all mounting hardware is in place and fully tightened, flipping the table to its upright position and attaching the grommet. The grommet is typically used for routing cables through the work surface.
- Leveling Glides: The inclusion of leveling glides (#7) suggests that the desk can be adjusted to compensate for uneven floor surfaces, ensuring stability.
The desk's modular design allows for efficient setup and potentially disassembly if needed for relocation. The various size options make it adaptable to different room sizes and user preferences, from compact personal workspaces to larger collaborative areas.
Maintenance Features
Maintaining the PROPR Lock Desk is simple and focuses on preserving its appearance and longevity.
- Cleaning: Surfaces should be cleaned with a dry or damp soft cloth. It is explicitly advised not to use abrasive, oil-based, or chemical-based cleaners, as these can damage the finish or material of the desk.
- Protection: The manual recommends using coasters to protect the surface from heat and water. This is crucial for preventing stains, rings, and other damage that can occur from hot beverages or moisture.
- Spill Management: Users are advised not to leave spills unattended. Promptly wiping up spills helps prevent absorption into the material, which could lead to staining or warping.
Safety Warning
A critical safety warning is provided regarding furniture tip-over:
- "Serious or fatal crushing injuries can occur from furniture tip-over."
- "To help prevent tip-over, read this entire warning."
- "To further reduce the risk of serious injury and death from tip-overs:
- Never stand on furniture
- Furniture intended for placement on floor
- Do not place items over 300lb on furniture"
This warning emphasizes the importance of proper usage and adherence to weight limits to ensure user safety. The instruction "Furniture intended for placement on floor" reinforces that the desk should not be used in any elevated or unstable configuration. The 300lb weight limit is a key specification for safe operation.
To Next Page
Need help?
General
