Fitting Kit
EN
K802
Fitment
● Clamps directly to edge of roof under the
doors
● Please check the front of this manual for
information relating specifically to your
vehicle.
● Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
● Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
● Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
9
To Next Page
Loading...
