Whispbar Track System
EN
Q20
● Carefully select position on vehicle roof
making sure that your crossbar lengths will
match selected positions for the tracks.
● Apply long lengths of masking tape to
vehicle roof in both positions.
● Repeat for all four positions.
● Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
● Tracks can be fitted either parallel or
tapered to match vehicle roof shape.
● Parallel Tracks:
A1 & A2 are equal
B1 & B2 are equal
C1 & C2 are equal
D1 & D2 are equal
● Tapered Tracks:
A1 & A2 are different
B1 & B2 are equal
C1 & С2 are equal
D1 & D2 are equal
● With help from another person, carefully lay
tracks over the masking tape and mark
hole positions with a pencil or pen.
● Take care not to move the tracks until the
holes are marked out.
4
To Next Page
Loading...
