3. Apply a small amount of toothpaste on the bristles.
4. Place the toothbrush bristles against the teethat a slight
angle (45 degrees), pressing firmly to make the bristles reach
the gum line or slightly beneath the gum line.
Note: Keep the center of the brush in contact with the teeth
at all times.
5. Press the power on/off button to switch on the Proscenic
Brushing
6. Apply light pressure to maximize Proscenic
Brush your teeth with a small back and forth motion so the
bristles reach between the teeth. Continue this motion
throughout the brushing cycle.
Note: The bristles should flare slightly. Do not scrub.
7. To clean the inside surfaces of the front teeth,
-5-
To Next Page
Loading...