Need help?Do you have a question about the Protec CIRRUS HYBRID and is the answer not in the manual?
General| Brand | Protec |
|---|---|
| Model | CIRRUS HYBRID |
| Category | Smoke Alarm |
| Language | English |
Overview of the Cirrus Hybrid's dual detection technology for fire and smoke monitoring.
Explains the Wilson Cloud Chamber principle for detecting sub-micron particles using humidified air.
Details how the Scatter Chamber Detector (SCD) measures scattered light to detect smoke presence.
Highlights key features of the hybrid system, including detection types and connectivity options.
Identifies external unit parts and explains the meaning of different LED status indicators.
Details the internal hardware components of the Cirrus Hybrid unit, including the display and pump.
Identifies and labels components located on the front door assembly of the Cirrus Hybrid.
Explains the touch screen display interface, home page, and quick navigation icons.
Details how to enter the access code to enable user functions and modify configurations.
Describes the home page display of Fire and Smoke (CFS) levels, and buzzer parameters.
Instructions for setting the current date and time on the Cirrus Hybrid unit via the touch screen.
Explains how to view current airflow, fault tolerance, and fan speed settings for each pipe.
Procedure for changing the user access code for enhanced security and configuration.
Details how to view network setup, IP addresses, and camera URLs for connected devices.
Instructions on accessing and interpreting the event log for fires, faults, and operational events.
How to view the system pipework installation map via the touch screen interface.
Describes actions and indications during pre-alarm and fire events, emphasizing building fire plan execution.
Instructions for silencing audible alarms and manually resetting fire conditions on the unit.
Covers faults related to device communication, uncommissioned devices, and airflow deviations.
Details faults for empty water reservoir, chamber seal leaks, and insufficient vacuum pressure.
Covers faults for low photodiode light, water fill issues, blocked sample/purge paths.
Addresses high optical background, corrupt settings, incomplete manufacture, and low DC power supply.
Details supply faults, corrupt program files, low unit temperature, and processor resets.
Covers unit isolation, ignored airflow, out-of-range calibration, and external battery faults.
Addresses mains power faults, halted pipe scans, heat faults, and incorrect device type.
Lists and describes various operational events logged by the Cirrus Hybrid, such as Power Up and Fire Reset.
Specifies water requirements and outlines recommended periodic checks and maintenance schedules.
Lists essential daily checks to be performed by the system user to ensure healthy operation.
To Next Page
