17
1. The Post driver is delivered with Slew arm perpendicular to the main frame
and with the Slew lock pin fitted to lock the arm. Ensure the machine is
manoeuvred in this position before hitching or unhitching from the tractor.
2. With the machine positioned on a firm level site and securely supported,
manoeuvre the tractor squarely up to the machine with the tractors link arms
set to a height level with the machines lower link brackets.
3. Connect the tractors link arms to the machine lower link brackets and retain
in position with the linkage and lynch pins supplied.
4. Connect the tractor top link (not supplied) to the machine and secure with
the linkage and lynch pin supplied. The tractor top link must be category 2 on
the machine end or conversion bush used if category 3.
Fitted to machine:-
To Next Page
Loading...