32 • ST-4
REF DESCRIPTION REF DESCRIPTION
M1080.004 DRIVE WASHER M1080.022 CRANK SHAFT BEARING REAR
M1080.005 CRANK SHAFT FOR PULL START .15 M1080.023 STARTER SHAFT
M1080.006 BLACK CRANK CASE W/O BEARING .15 M1080.024 SCREW FOR PULL START (4 PCS)
M1080.008 CONROD FOR STANDARD TYPE M1080.025 SCREW SET FOR CARBURATOR (2 PCS)
M1080.009 WRIST PIN W/ PAD .15 M1080.026 CARBURATOR GASKET (1 PC)
M1080.010 PISTON & SLEEVE SET (NICKEL PLATING) M1080.027 ADJUSTMENT SCREW SET W/ SPRING
M1080.011 CYLINDER HEAD (DIE-CASTING) .15 M1080.028 CRANK SHAFT BEARING FRONT
M1080.012 HEAD SHIM .15 (1 PC) M1080.029 ROTOR SET .15 (4.6MM)
M1080.013 SCREW FOR HEAD (4 PCS) M1080.031 CARBURATOR O-RING SET (2 PCS)
M1080.014 NEEDLE W/ O-RING M1080.032 CARBURATOR GASKET SET (4 PCS)
M1080.016 NEEDLE AND NEEDLE VALVE SET M1080.033 CARBURETOR MAIN BODY
M1080.018 PULL START ASSEMBLY W/O ONE WAY BEARING M1080.035 THROTTLE ARM SET
M1080.019 BACK PLATE GASKET (1 PC) M1080.050 BACK PLATE FOR PULL START
M1080.020 ROTARY CARBURETOR ASSEMBLY .15 M1080.051 SCREW FOR BACK PLATE (4 PCS)
M1080.021 ONE WAY BEARING
M1080.013
M1080.011
M1080.012
M1080.010
M1080.008
M1080.028
M1080.004
M1080.050
M1080.022
M1080.024
M1080.019
M1080.023
M1080.005
M1080.009
M1080.006
M1080.025
M1080.051
M1080.021
M1080.018
M1080.020
M1080.027
M1080.016
M1080.032 M1080.026
M1080.033
M1080.014
M1080.031
M1080.029
M1080.035
Engine spare parts RG-15 M1080
To Next Page
Loading...