Network Cable Tester
Digital Multimeter User Manual
XC5078
Thank you for purchasing this Network Cable Tester Digital Multimeter.
This innovative combination LAN tester and multimeter is ideal for network
installers or technicians. It allows for easy checking of cable integrity and
measurement of AC & DC voltage and current, resistance and continuity.
Cables can be checked for continuity, open circuits, short circuits and cross
connects. Utlise the remote tester to check wall jacks or patch panels.
Please familiarise yourself with the functions of the multimeter before use. We
recommend retaining this manual for ease of reference.
• Improper use of this meter can cause damage, shock, injury or death.
• Always remove the test leads before replacing the battery or fuses.
• Before using the meter, please inspect the condition of the test leads and the
meter itself for any damage. If damage is present, please discontinue use.
• Do not measure voltage if the voltage on the terminals exceeds 1000V above
earth ground.
• Use great care if voltages are greater than 30VAC RMS. Anything above this
is considered a shock hazard.
• Do not apply voltage to the meter when the resistance is selected.
• Do not exceed the maximum limits of the input values shown in the
specication tables on pages 9-11 of this manual.
• Remove the batteries from the meter if it will be unused for an extended
period of time.
3
To Next Page
Loading...
Need help?
General