Need help?Do you have a question about the Proton AA-1150 and is the answer not in the manual?
Provides critical warnings regarding fire and electric shock, and cautions for safe operation.
Emphasizes reading, retaining, and heeding all safety and operational instructions.
Covers avoiding water, ensuring ventilation, and keeping away from heat sources.
Details power source, grounding, cord protection, and preventing electrical shock hazards.
Covers cleaning, user servicing limitations, and when professional service is required.
Explains DPD technology providing peak power levels up to 4 times rated power.
Highlights dual power supplies for improved stereo separation and sound stage.
Details the amplifier's ability to deliver up to 20 amperes into low impedance loads.
Advises keeping the original carton for returns and the receipt for warranty claims.
Introduces the installation process as a series of simple, clear instructions.
Warns against connecting/disconnecting audio cables with the power on to prevent damage.
Outlines the four primary steps required for installing the power amplifier.
Provides guidance on selecting a suitable location considering ventilation, access, and environmental factors.
Illustrates the right and left speaker output terminals on the amplifier's rear panel.
Details the rear panel layout and connections for the European version of the AA-1150.
Details the rear panel layout and connections for the USA and Canadian versions of the AA-1150.
Step-by-step guide for connecting speaker cables, emphasizing polarity and secure connections.
Crucial warning about connecting 'hot' outputs together, which can severely damage the amplifier.
Illustrates how to connect the AA-1150 power amplifier to the pre-amplifier and other sources.
Stresses maintaining correct left and right channel connections for proper sound orientation.
Information on the correct power cord and voltage settings for different countries.
Details the correct procedure for turning the preamplifier and power amplifier on and off.
Explains the PROTECTION light, its function during surges, and when it indicates a problem.
Describes the Dynamic Power on Demand (DPD) lights and their automatic operation.
Explains the function and response of the amplifier's meters for peak and average power.
Details the single power supply fuse, its replacement, and troubleshooting if it fails repeatedly.
Recommends checking speaker cable connections for tightness and cleanliness monthly.
Provides instructions on cleaning the unit and reiterates user servicing limitations.
Defines various audio terms used in the manual, such as Amplifier, Bass, Crossover, EQ.
Continues the definition of audio terms, including Program Source, Subwoofer, Tweeter, Woofer, and Voice Coil.
Lists detailed technical data for the AA-1150, including power output, frequency response, and dimensions.
To Next Page
General