167
Description of Front A/C Control
System Buttons
1. Front windshield defrosting/defogging
button
To quickly remove fog or frost from the
front windshield, direct air to the front
windshield. For optimal effect, clear all
ice and snow from the front windshield
before defogging. Adjusting the air
volume adjustment button in defogging
mode will increase or decrease the air
volume accordingly, and the air outlet
mode will remain in the window-blowing
mode.
When using the front windshield
defrosting/defogging function, the A/C
and external circulation will be
automatically turned on (and cannot be
switched). Before turning on the front
windshield defrosting/defogging
function, if the A/C is turned off or in
AUTO mode, the air volume will be
manual air volume 6th gear; If the A/C is
turned on in manual mode or AUTO
mode, and the air volume is less than
6th gear, the air volume will be manual
6th gear; If the A/C is turned on in
manual mode or AUTO mode, and the
air volume is greater than or equal to 6
gear, the air volume will remain
unchanged at the current air volume. In
order to maintain the defrosting/
defogging effect, please do not turn off
the A/C and external circulation.
When the A/C is turned off, the front
windshield defrosting/defogging button
is operated, and the A/C is activated to
perform the front windshield defrosting/
defogging function.
2. Interior/exterior circulation switching
button
Press/click this button to achieve
manual switching between external
circulation (fresh air) and internal
circulation. When in the external
circulation, The actual state of the
internal and external circulation
dampers will be automatically adjusted
according to the temperature control
needs in the vehicle.
When the A/C is turned off, the A/C is
still turned off after pressing/clicking the
internal and external circulation switch
button, but the internal/external
circulation will switch.
3. AUTO button
According to the temperature required
by the body, adjust the temperature
button and select the temperature.
Press/click the AUTO button, and the A/
C will automatically control four
functions: internal and external
circulation, air outlet mode, air volume,
and A/C to achieve the desired
temperature; At this time, if the air outlet
mode is manually adjusted or the
defrosting/defogging button of the front
windshield glass is pressed, or the air
volume is manually adjusted, or the
AUTO button is pressed/clicked again,
the AUTO button indicator light will turn
off and the automatic A/C will be exited.
When the A/C is turned off, the A/C is
activated to enter the fully automatic
control mode after pressing/clicking the
Air Conditioner
To Next Page
Loading...