EasyManua.ls Logo

Proton e.MAS 7 - Coolant

Default Icon
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
180
3. After closing the front compartment
hood, verify that it has been securely
locked by trying to lift the front edge of
the front compartment hood.
If it is not properly locked, open the front
compartment hood again, and then close it.
Do not forcibly press the hood.
Do not drive the vehicle with the hood
not properly closed.
Coolant
Be sure to park the vehicle on flat ground
when inspecting the coolant level. The
coolant level in the coolant expansion tank
should be between MAX and MIN marks. If
the coolant level is below the MIN mark, top
up some coolant into the expansion tank
according to specified procedures as
follows:
Before you open the pressure cap of coolant
expansion tank, ensure the cooling system
(including the pressure cap of coolant
expansion tank and the upper hose of
radiator) has completely cooled down.
1. Slowly turn the pressure cap
counterclockwise. If you hear any
Maintenance and Repair

Table of Contents