• Ensure that QDLink app has been installed
on the mobile phone or download and install
it through Connection Help.
• USB connection requires user permission to
use USB accessory mode. Select the
checkbox and tap OK to use.
• Support screenshots. Select the checkbox
and tap Start to use.
• Does not require to install QDLink app on
mobile phone.
• Connect iPhone to the infotainment head
unit via USB cable.
• The phone will prompt you whether to trust
the device when connecting to the
infotainment head unit for the first time. Tap
Trust and enter the password to unlock. It is
not necessary if the phone does not have a
lock screen password.
16. Internet Data Add-on via MyProton App
To purchase data add-on, make sure you have installed and created MyProton app account.
Download and install MyProton app on mobile phone:
1. Download MyProton Official app from application market and install on your mobile
phone.
2. Open MyProton Official app, tap Sign up for registration.
3. You will receive an email for your verification.
4. Upon successful verification, you will receive activation account success message.
5. Then you may proceed to log in MyProton app.
Note: It is important that the correct email address is being used during sign up at MyProton
app.
To Next Page
Loading...
