English
14
USB Common Operations
Folder select
This function allows you to select a folder
containing MP3/WMA/FLAC les and start playing
from the rst track in the folder.
1. Press the
[ ]
button to move the next
folder. Press the
[ ]
button to move the
previous folder.
*
Press the
[ ]
button while in the nal
folder will shift to the rst folder.
*
Folder without any MP3/WMA/FLAC le is
not selectable.
2. Press the [ ]/[ ] button to select a track.
[ ]
[ ]
UNICODE ID3 (Chinese, Japanese and etc) is
not supported. Only ASCII characters can be
displayed in Tags.
If ID3 TAG has Japanese, Chinese or other non-
supported characters, “
*
” will be displayed as
substitution.
Selecting a track
Track-up
1. Press the [ ] button to move to the beginning
of the next track.
2. Each time the [ ] button is pressed, playback
proceeds to another track in the advancing
direction.
Track-down
1. Press the [ ] button to move to the beginning
of the current track.
2. Press the [ ] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
Fast-forward
Press and hold the [ ] button for 1 second or
longer.
Fast-backward
Press and hold the [ ] button for 1 second or
longer.
MP3/WMA/FLAC playing order
During playback, les and folders are accessed
in the order in which they were written by the
CD-ROM writer or PC. Files might not always
be played in the order displayed on the PC. You
may be able to set the order in which MP3/WMA/
FLAC les are to be played by writing them onto
a medium such as a USB with their le names
beginning with play sequence numbers such as
“01” to “99”, depending on your USB writer.
For example, a medium with the following folder/
le hierarchy is shown below.
To Next Page
Loading...