Proton SAGA 2023 - Operation of Controls

flow can be adjusted by adjusting the
fan speed.
Operation of controls
1 -
Air conditioning switch
Push the switch when the fan is
switched on, and the air condition-
ing and heating unit will operate.
The indicator lamp will illuminate.
Push the switch again, and the
cooling/heating unit will stop.
CAUTION
When using the air condition-
ing/heating, the idling speed is
slightly increased. Therefore, be
careful when starting to move the
vehicle.
2 -
Fan switch control knob
Adjust the fan speed control knob
clockwise or anti-clockwise for con-
trol of the amount of air flow. The
setting for ordinary use should be
from low to high speed.
3 -
Temperature control knob
The air flow temperature will
gradually increase as the knob is
turned to clockwise.
DOIUW007L20006
AIR OUTLETSMODE SELEC-
TION
B
B, C
C, A
(1)
A,C
A
(1) Means a small amount
A: From front and side defroster
B: From center and side ventilators
C: From under the instrument panel
4 -
Mode selection knob
Main flow direction
(Face position)
Air flows directed
toward the face.
Each vent can be
controlled individu-
ally to direct the air
flow.
(Feet / face position)
Air flows directed
toward to the face
and the floor ( feet
area ).The amount of
air flow to the feet
is less than to the
face.
(Feet position)
Air flows direct to
your feet. A small
amount of air flow
to the windshield ,
face and side door
windows.
(Feet/defroster posi-
tion)
Air flows to the floor
(feet area) and the
windshield. A small
amount of air flows
to the face and side
door windows.
(Defroster position)
The windshield and
door glasses are de-
misted.
108
For Pleasant Driving
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.