5 -
Air selection switch
(Recirculation posi-
tion)
The inside air is recir-
culated. Select this
position to keep the
inside air free of
dust or other contam-
inants in the outside
air.
Press this switch for
inside recirculation
position.The indicat-
or lamp will illumin-
ate. Depressing this
switch will change to
outside air recircula-
tion position.
NOTE
Especially during cold weather, the
recirculation position should only
be used for a short time in order to
prevent the unnecessary formation
of mist on the windows.
Leg area cooling/heating
DOIMW007L08007
Set the mode selection knob and air se-
lection lever to the positions shown in
the illustration.
Adjust the temperature by tuning the
temperature control knob clockwise or
anti clockwise.
Select the desired fan speed.
DOIUW007L20004
Introduction of the outside air
To introduce air into the vehicle during
hot weather, set the air selection lever
and temperature control knob to the
position shown in the illustration.
Depress the air selection switch (A) for
outside air intake. The indicator lamp
will turn-off
Be sure to set the temperature control
knob all the way to the left. Select the
desired fan speed.
NOTE
Turn the mode selection knob clockwise
and air will flow to the leg area and the
windscreen.
109
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...