Forum 500 / Forum 5000: Code-number Procedures
1
Forum 500 / Forum 5000:
Code-number Procedures
You can use the code-number procedures on standard terminals, ISDN and
SIP terminals as well as on system telephones.
Forum 500 / Forum 5000: Code-number Procedures
Dial out
Making internal calls
(on automatic seizure of
external line)
1]
H** Z (internal tel. no.)
Deactivating Least Cost
Routing (LCR)
1] 5]
H## Z (dialling code, tel. no.)
VIP call
1] 5]
H*# Z (internal tel. no.)
Calling an entrance intercom
(e. g. of the “Doorphone”
type)
1] 4]
H*102 to H*109
Door opener
1] 4]
H*112 to H*119
Keypad dialling
1] 5]
H*12 Z (keypad code digits)
Announcement
1]
H*13* Z (internal tel. no.) #
Intercom
1]
H*131* Z (device-ID) #
Calling Line Identification
Restriction (CLIR) by call
1]
H*31 Z (tel. no.)
Baby call
5]
on: H*53* (external access code,
e.g.
0 ) Z (destination tel. no.) #
off:
H#53#
Speed dialling
1]
H*7 Z (speed dialling no.)
alternatively:
H*7*
Z (speed dialling no.) #
Dialout for another terminal
H*51* Z (Device-ID:) *
Z (destination tel. no.) #
fo_kba_codes_en.fm Seite 1 Montag, 16. Februar 2015 4:28 04
To Next Page
Need help?
General
