cleaning agents containing alcohol (e.g. benzine, clean-
ing alcohols etc.) must be avoided, as these can attack
the plastic housing shells.
Lubrication
Normally, no further lubrication is necessary for opera-
tion. Avoid oiling or greasing the height adjustment spin-
dles; remember that lubricants can mix with planing dust
and will then have to be removed. If necessary, use a dry
lubricant only.
Disposal:
Please do not dispose of the device in domestic waste!
The device contains valuable substances that can be re-
cycled. If you have any questions about this, please con-
tact your local waste management enterprise or other
corresponding municipal facilities.
EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: DH 40
Article No.: 27040
In sole responsibility, we declare that this product con-
forms to the following directives and normative docu-
ments:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 02.2010
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 06.2009
EU Machinery Directive 2006/42/EC
DIN EN 61029-1 / 01.2010
DIN EN 61029-2-3 / 11.2004
Date: 09.03.2015
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
- 15 -
To Next Page
Loading...