- 13 -
7.4 After use
Important!
D
isconnect milling machine mains plug before cleaning. Risk
of injury!
C
lean compound-type table and milling machine using a soft
c
loth and brush after use. Then lightly oil the guides and dis-
tribute the oil by moving the table. Never use compressed air
f
or cleaning the compound-type table as cuttings entering
the guides in this manner could destroy the guides.
8 Disposal:
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding munic-
ipal facilities.
9 EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L
-6868 Wecker
Product designation: PF/FF 250/BL
Article No.: 24112/24114
In sole responsibility, we declare that this product conforms
to the following directives and normative documents:
E
U EMC Directive 2014/30/EC
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EU Machinery Directive 2006/42/EC
EN 62841-1:2015
EU-RoHS-Directive 2011/65/EU
Date: 05.10.2022
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the sig-
natory.
To Next Page
Loading...
