become hazardous when used on another tool.
Service:
Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to fol-
low Maintenance Instructions may create a risk of elec-
tric shock or injury. Certain cleaning agents such as
gasoline, carbon tetrachloride, ammonia etc. may
damage plastic parts.
SPECIFIC SAFETY RULES
Hold tool by insulated gripping surfaces when perfor-
ming an operation where the cutting tool may contact
hidden wiring or its own cord. Contact with a „live“ wire
will make exposed metal parts of the tool „live“ and
shock the operator.
Some material may produce harmful or toxie dust (i. o.
lead containing paint, some kinds of wood or metal).
- 6 -
Symbols
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Ø Diameter Size of drill bits, grinding wheels, etc.
n
0
No load speed Rotational speed, at no load
…/min Revolutions or reciprocation per minute Revolutions, strokes, surface speed, orbits etc. per minute
1, 2, 3, … Selector settings Speed, torque or position settings. Higher number means
greater speed
Infinitely variable selector Speed is increasing from narrow end
➞ Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Class II construction Designates Double Insulated Construction tools.
Only use accessories and spare parts recommended
by PROXXON (Observe the max. permitted rotational
speed).
Please note the following in addition:
PROXXON is not liable for any damage occurring as a
result of:
1. Handling that is not done in the normal way
2. Using the unit for purposes that are not listed in the
instructions
3. Failure to comply with the safety instructions
Any claim to warranty shall be null and void in the
event of
1. Errors in the use of the unit
2. Inappropriate operation
3. Manipulation or opening-up of the unit
Only use PROXXON original spare parts. Only these
can guarantee maximum quality and reliability.
We reserve the right to make changes and improve-
ments without notice.
The SGM motorized carver:
Captions:
1. ON-OFF switch
2. Device clamp
3. Connecting cable with mains plug
4. Coupling ring to attach the blade
5. Ventilation slots
6. Chuck key
7. Set of blade inserts
Technical data
Motor:
Voltage 115 V, 60 Hz
Rating 0,4 Amps
Strokes 15,000 strokes/min
Weight approx. 1,5 lb
Noise typically 74 dB(A)
Vibration at the handle ≤ 2.5 m/s
2
10 min/10 min:
Rated operating time: 10 minutes
Rated reseting time: 10 minutes
To Next Page
Loading...
