EasyManua.ls Logo

PS Audio GCPH - What Voltages Can I Run GCHA On?

PS Audio GCPH
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4826 Sterling Drive, Boulder, CO 80301 Questions and Answers
PH: 720.406.8946 support@psaudio.com www.psaudio.com 15-044-11-1
Rev B
®
Questions and Answers
©2005 PS Audio Inc. All rights reserved.
Owner’s Reference GCPH Phono Preamplifier
AÊÊUÊÊDÊÊIÊÊO
PÊS
Isolation through the use of spikes, cones or Sorbothane feet is recommended for the GCPH if
space and budget allows. Isolation of any piece of high-end stereo and theater equipment is always
recommended wherever practical.
The GCPH is specific to your country’s voltage. Do not use the GCPH on a voltage higher than it is
rated for. For instance, do not take a 120 volt rated GCPH and attempt to use it in a 220 volt country.
Failure to observe this cautionary note will void your warranty. If you need to operate the GCPH at a
voltage other than the voltage it was designed for, contact your dealer, distributor or the factory for
help.
The GCPH will generate a bit of heat and may remain warm to the touch. This is normal.
We do not recommend removing power to the GCPH. We recommend leaving the GCPH powered
at all times.
What Voltages
Can I Run GCHA
On?
Isolation?
5

Related product manuals