EasyManua.ls Logo

PS TEN - TEN Lock Applications

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.pslocks.com | PS GmbH, Melisau 1255, 6863 Egg, Austria
6
TEN Manual
Master code:
(default 000000)
To open the lock and reset the used code please
press for 3 seconds until the green LED flashes.
Enter now 000000 and the lock will open and is avail-
able for a new code.
Change the master codes:
(for example from 000000 to 123456):
The lock has to be unlocked and the locking device
has to be in the lock (door closed).
Press ✔✔ 000000 ✔✔ 123456 ✔✔ 123456
Two green LED signals will confirm the successful
change of the code.
Wrong trial:
After three failed trials the lock will go into a standby
mode for 60 seconds.
Emergency opening with master code:
If you forgot your 4-digit code and the lock is locked,
a caretaker, for example, can open a locker using
the master code. An emergency opening will cause
the previously entered code to be deleted.

Other manuals for PS TEN

Related product manuals