www.pslocks.com | PS GmbH, Melisau 1255, 6863 Egg, Austria
10
TEN Manual
• INSTALLATION WITH THE “LATCH74”
The locking part "latch74" unites the 3-dimensional ad-
justment with an elegant design.
• With a 90° mounting possibility, the "latch74" is used
for swing doors and drawers.
• The integrated ejector with a force of 5,4N opens
the door automatically as soon as the lock is un-
locked. Hinges with locking function can cancel this
function.
• Thanks to the elegant cover, the mechanism is pro-
tected against dirt and can also be cleaned easily.
• The assembly and the fine adjustment of the locking
part are simple and can be done in a very short
time with standard screwdrivers.
• Carbon-reinforced material as well as high flexibility
due to the adjustability in height, depth and to the
side mark the locking part.
• Ideally, the locking bolt is located exactly in the
middle after assembly.
• The integrated rated breaking point of 35 kg pro-
tects the furniture in case of forced opening.
To Next Page
Loading...
