Note: Use a rubber mallet to ensure snug connection of all nonmetal parts.
1. Place the bases of the four Posts (2,3) into the corners of the Tray (1).
TheFlangeoneachPostwillonlytintocertaincorners.
2. Insert Carriage Bolt (10) down through the holes in the bases of the Posts (2,3).
3. Attach Casters (6,7) to Carriage Bolts (10) using Split Washers (11) and Nuts (12). For best
operation, the two Straight Casters (6) go on the same end of the cart, and the two Swivel
Casters (7) go on the other end.
4. Place the other Tray (1) upside down on the work surface. Turn the Handle (8) upside down with
the cup holder toward the Tray and the hand holes on the outside.
5.PlacetheTraywithttheHandlermlyontopofthePosts(2,3).PositiontheHandleaboveeither
theswivelofxedcasters,dependingonoperationpreference.
6. Place a Post Cap (4,5) on top of each corner of the Tray (1).
7. Use three Screws (9) through each Post (2,3) from underneath to secure them.
ASSEMBLY INSTRUCTIONS
SPECIFICATIONS
Industrial Utility Cart: ..........................................................W53991
Construction: ............................................High Impact Poly-Propylene
Maximum Capacity: .................................................................500 Lbs.
Tray Size: ................................................. 30 in. L x 16 in. W x 3 in. D
Overall dimensions: ...................39-3/4 in. L x 17 in. W x 33-1/4 in. H
IMPORTANT SAFETY INFORMATION
Specifications are
subject fo change
without notice
Read these safety warnings before operation.
Assemble only according to these instructions. Improper assembly can create hazards.
Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
Keep bystanders out of the area during assembly.
Do not assemble when tired or when under the influence of drugs or medication.
Weight capacity and other product capabilities apply to properly and completely
assembled product only.
This product is not a toy. Do not allow children to play with or near this item.
Use as intended only.
Inspectbeforeeveryuse:donotuseifpartsarelooseordamaged.Donotexceedlisted
weight capacity, evenly distributed. Be aware of dynamic loading! Sudden load
movementmaybrieflycreateexcessloadcausingproductfailure.
Use only on flat, level, hard surface able to properly support cart and load.
Maintain product labels and nameplates. These carry important safety information.