How to check if wireless repeaters are working on PTI security systems Wireless Door Alarm System?
To check if the wireless repeaters on the site are working, remove the cover of the repeater box and check the LED indicators on the front of the repeater.
What to do if there was construction near PTI security systems Wireless Door Alarm System?
If there has been any construction on, or near the site, check if anything has been changed at the site.
How to check wireless multiplexer communication with the controller in PTI security systems Wireless Door Alarm System?
To check if the wireless multiplexer is communicating with the controller, check the LEDs on the wireless multiplexer board or run the system setup report on the controller.
General| Brand | PTI security systems |
|---|---|
| Model | Wireless Door Alarm System |
| Category | Security System |
| Language | English |
Specifies the necessary components and conditions for the wireless door alarm system to function correctly.
Lists the essential tools and equipment required for the installation of the transmitter assembly.
Provides guidance on choosing the optimal position for door transmitters for reliable operation.
Details the procedure for initially mounting the door magnet component of the transmitter.
Explains the correct mounting procedures for door transmitters based on door type.
Offers specific instructions for mounting transmitters on roll-up doors, considering their unique movement.
Provides step-by-step instructions for mounting the transmitter box and magnet on a door jamb.
Details the procedure for mounting the transmitter assembly on a door header when jamb mounting is not feasible.
Guides on mounting transmitters for swing doors, emphasizing placement to avoid interference and damage.
Specific instructions for header mounting on metal swing or slide doors.
Instructions for header mounting on hollow core swing doors.
Explains how to use a tool to test and ensure correct alignment of the transmitter and magnet.
Describes the process of securely attaching the transmitter mounting plate using adhesive and screws.
Defines the requirements for a secure and accessible indoor location for the multiplexer.
Specifies the criteria for selecting a suitable location for the wireless receiver.
Details the steps for physically connecting the multiplexer to the system and power.
Explains how to view the multiplexer's unique address and identification details.
Guides on accessing and configuring system parameters through the multiplexer's setup mode.
Configures tamper sensor behavior and audible feedback for key presses.
Sets date format and operational modes for Relay 2.
Provides the procedure for registering one transmitter at a time with the multiplexer.
Explains how to register multiple transmitters sequentially.
Covers removing transmitter assignments from the multiplexer.
Describes the process of clearing all transmitter registrations from the multiplexer.
Emphasizes creating a table linking multiplexer/channel numbers to physical door/unit numbers.
Describes the 'Door Open' and 'Door Close' events and their reporting.
Details 'Tamper Alarm' and 'Tamper Secure' events for transmitters.
Explains 'Unit Comm. Off' and 'Unit Comm. On' events for transmitter status.
Covers 'Low Battery' alerts and receiver communication status.
Details 'No Activity' and multiplexer tamper events.
Guides on determining the number of repeaters required based on site conditions and range.
Step-by-step instructions for physically installing the wireless repeaters.
Outlines procedures to verify communication between the multiplexer and the controller using LEDs.
Describes testing the communication status between the multiplexer and the wireless receiver via LEDs.
Explains how to test repeater operation by checking indicator lights on the unit.
Details the process of testing individual door transmitters for proper operation.
Guides through diagnosing issues related to multiplexer power and controller communication.
Addresses problems concerning the wireless receiver and transmitter connections.
Provides steps for troubleshooting transmitter registration and battery-related problems.
Guides on checking if a specific transmitter is registered and if it reported low battery.
To Next Page
