MAINTENANCE
16
4. Screw in the filler cap/dipstick securely.
REDUCTION GEAR OIL (Only on equipped model)
<1/2 reduction with automatic centrifugal clutch>
1. Remove the oil filler cap and wipe the dipstick clean.
2. Insert the dipstick into the filler neck but do not screw it in.
3. If the level is low, fill to the upper level mark with the same oil recommended for the engine.
Oil capacity of G160/G200/G240/G270F(D)-B: 500 cc
SERVICING YOUR ENGINE
ENGINE OIL RECOMMENDATIONS
Oil is a major factor affecting performance and service life. Use 4-stroke automotive detergent
oil.
FILLER CAP/
DIPSTICK
DRAIN BOLT
OIL LEVEL
DIPSTICK/FILLER CAP
UPPER LEVEL
DRAIN BOLT
To Next Page
Loading...
Need help?
General
