What to do if my Public Safety Equipment KUSTOM SIGNALS ProLaser 4 Measuring Instruments ProLaser 4 won't power on with batteries?
First, try replacing the rechargeable AA batteries with freshly charged ones. If that doesn't work, the ProLaser 4 may need to be returned for service.
How to fix Public Safety Equipment KUSTOM SIGNALS ProLaser 4 ProLaser 4 not powering on via USB?
Ensure that the device providing power to the ProLaser 4 is working correctly. If the power source is not the issue, replace the USB cable with a new one of the correct type.
What to do if Public Safety Equipment KUSTOM SIGNALS ProLaser 4 ProLaser 4 fails the start-up test?
The ProLaser 4 needs to be returned for repair.
General| Display | LCD |
|---|---|
| Laser Wavelength | 904 nm |
| Operating Temperature | -22°F to +140°F (-30°C to +60°C) |
| Accuracy | ±1 mph (±2 km/h) |
| Weight | 2.5 lbs |
| Power Source | Rechargeable battery or 12V DC power |
| Speed Accuracy | ±1 mph (±2 km/h) |
| Range Accuracy | ±6 inches |
Provides a high-level overview of the ProLaser 4 traffic safety lidar and its capabilities.
Lists all hardware and software components included with the ProLaser 4 system.
Details available accessories and optional items for enhanced functionality.
Identifies the physical locations of all controls, buttons, and displays on the unit.
Explains the operating characteristics and technology of the ProLaser 4 speed detection system.
Provides advice for adjusting display brightness for optimal use in low-light conditions.
Detailed explanation of the functions of each button, trigger, and display.
Describes the information presented on the rear display and Head-Up Display (HUD).
Covers instrument setup, including location selection and environmental considerations.
Details the startup process, including self-tests and system messages.
Explains how to select operational modes and customize unit settings.
Describes how to enable and use the feature for improved performance in adverse weather.
Step-by-step instructions for making speed and range measurements.
Instructions for using the stopwatch feature to calculate average speed.
Information on USB ports and their functionality for data transfer and power.
Covers battery operation and connecting to external power sources.
Details sleep mode and automatic power-off functions to save battery.
Instructions for installing optional shoulder stock and tripod mounts.
Explains how to enter and navigate the ProLaser 4's menu system for configuration.
Configures the minimum and maximum range values for speed display.
Sets the direction of travel (approaching/receding) for target vehicles.
Details DIF-TEST, Continuous/Single, and mph-km/h measurement modes.
Customizes Head-Up Display features, including range data and reticle type.
Captures and reviews saved measurement events with date and time stamps.
Allows the user to set the unit's current time and date.
Explains how to use the stopwatch feature for average speed calculations.
Provides instructions for safely cleaning the unit's lenses and apertures.
Details self-tests and manual tests to ensure measurement accuracy.
Discusses calibration requirements, intervals, and legal mandates.
Describes a specific test procedure for calibrating range measurements.
Classifies common system faults and symptoms for diagnosis.
Diagnoses problems related to the unit not powering on via batteries or USB.
Troubleshoots issues preventing the ProLaser 4 from communicating over USB.
Resolves problems where the unit fails to range or speed at a specific target.
Details laser safety classifications, standards, and operational precautions.
Outlines compliance with US (IACP, NHTSA) and international standards (IEC, CE, FCC).
Provides detailed general and operational specifications for the ProLaser 4.
To Next Page