To Next PageTo Next Page
Need help?Do you have a question about the Pujol Mini Marathon Pro Q and is the answer not in the manual?
Lists necessary tools like screwdrivers, wrenches, etc. for installation.
Details the functions of each DIP switch for system configuration.
Explains connections for the 24V DC motor and Hall sensor.
Guide for programming remote control emitters for the system.
Instructions for setting up automatic closing and learning the door run.
Specifies the intended use and conditions for the Mini Marathon door operator.
Lists European directives and technical standards the product complies with.
Crucial safety rules to prevent accidents during the installation process.
Safety precautions to be taken during maintenance operations.
Important information and warnings specifically for the installation technician.
Detailed technical data including power, dimensions, weight, and operating parameters.
Step-by-step guide for fitting the rack and installing the door operator unit.
Instructions on setting up mechanical end stops for door operation safety.
Details for connecting the 220V AC power supply to the operator.
Identifies and explains the function of each terminal on the control board.
Detailed explanation of DIP switch settings for various operational modes.
How to choose between operating modes A and B for different functionalities.
Guides on adjusting motor force and speed for optimal performance and safety.
Procedure to check and correct the motor's opening and closing direction.
Steps to program the door's travel path and automatic closing timer.
How to adjust the gentle stop feature for smoother door movement.
Setting up partial opening for pedestrian access.
Information on connecting external devices like pushbuttons or safety bands.
Explains the Hall sensor and photocell safety inputs and their functions.
Details for 24V output, flash lamp, and courtesy light connections.
Configuration for safety devices during door opening and closing phases.
Guides on testing photocell connections with the control unit.
How to select internal/external radio and manually memorize emitter codes.
Procedures for memorizing additional radio codes and cancelling existing ones.
Setting up pedestrian channel and installing an optional battery backup.
Details the warranty terms, obligations, and conditions for service.
Disclaimer regarding liability for installation and use of the operator.
A comprehensive table listing common issues and their corresponding solutions.
Essential safety guidelines for using the automatic door operator.
Overview of the operator's functionality and system components.
How to operate the door manually in case of power failure or malfunction.
Recommendations for routine checks, repairs, and available accessories.
General| Motor Voltage | 24V DC |
|---|---|
| Protection Rating | IP54 |
| Remote Control | Yes |
| Power Supply | 230V AC |
| Motor Type | DC |
| Voltage | 230V |
| Opening Speed | 0.3 m/s |
| Closing Speed | 0.3 m/s |
| Safety Features | Obstacle detection |
| Manual Operation | Yes |
